Valve Positioners

FIELDVUE Digital Valve Controllers

Foundation Fieldbus Communication Protocol
DVC6200f

HART Communication Protocol
DVC2000
DVC6200

Electro-Pneumatic

Used with Sliding Stem Valves
3582i
3661

Used with Rotary Valves
3620J
3620JP

Pneumatic

Used with Sliding Stem Valves
3582
3660

Used with Rotary Valves
3610J
3610JP
3710 / 3720


DVC6200f

FIELDVUE® DVC6200f digital valve controllers are communicating, microprocessor-based current-to-pneumatic instruments with linkage-less, non-contact travel feedback. Three important functions are performed by the DVC6200f instrument:
- Controlling the movement of a valve stem or shaft by converting the digital input signal from the process controller to a pneumatic output signal to the actuator.
- Automatic calibration and configuration using the power of microprocessor technology.
- Communication capability via the FOUNDATION™ fieldbus protocol to provide instrument and valve diagnostic information.

 

Registered by the Fieldbus Foundation, the DVC6200f uses the patented linkage-less, non-contact travel feedback technology. It offers an all digital Foundation fliedbus open communication protocol.

Title - Document Type
FIELDVUE 6200f Series Digital Valve Controllers (PDF) - Bulletins
FIELDVUE 6200f Series Digital Valve Controllers (Web) - Bulletins

Fisher® FIELDVUE DVC6200f Digital Valve Controller Quick Start Guide

FIELDVUE DVC6200f Digital Valve Controller Pocket Reference Card

Back to top


DVC2000

The FIELDVUE® DVC2000 single-acting digital valve controller is a communicating, microprocessor-based digital-to-pneumatic valve-mounted instrument. With pushbuttons and a liquid crystal display, configuration and calibration can be performed easily in any of its seven languages including English, German, French, Spanish, Italian, Chinese and Japanese. The digital valve controller receives feedback of the valve travel position plus supply and actuator pneumatic pressure. This allows the instrument to diagnose not only itself, but also the valve and actuator to which it is mounted. This provides you with very cost effective maintenance information, so that required maintenance can be performed  on the instrument and valve when there really is a need.

 

Title - File Size (KB) - Publish Date - Document Type
FIELDVUE DVC2000 Series Digital Valve Controllers (PDF) - 84kb - 7/1/05 12:00 - Bulletins
FIELDVUE DVC2000 Series Digital Valve Controllers (Web) - 39kb - 7/1/05 12:00 - Bulletins

Back to top


DVC6200

The FIELDVUE® DVC6200 series digital valve controller is a communicating, microprocessor-based current-to-pneumatic instrument.  The DVC6200 now makes the linkage-less, non-contacting technology available in an explosion proof housing. The DVC6200 replaces the feedback potentiometer with the proven Hall Effect sensor, thus further enhancing the inherent reliability of the DVC6000. The performance and hazardous rating certifications of the DVC6200 are the same as the DVC6000. The DVC6200 is also adaptable to large travels and all actuator mountings.

Title  - Document Type
FIELDVUE DVC6200 Series Digital Valve Controllers (PDF) - Bulletin
FIELDVUE DVC6200 Series Digital Valve Controllers (Web) - Bulletins

Fisher® FIELDVUE DVC6200 Digital Valve Controller Quick Start Guide

FIELDVUE DVC6200 Digital Valve Controller Pocket Reference Card

Back to top


3582i



The Type 3582i electro-pneumatic, single-acting positioner is used with diaphragm-actuated, sliding-stem control valve assemblies. The electro-pneumatic valve positioner receives an electronic input signal from a control device and modulates the supply pressure to the control valve actuator, providing an accurate valve stem position that is proportional to the pneumatic input signal received from a control device.

 

 

Title - File Size (KB) - Publish Date - Document Type

3582 Series Pneumatic and Type 3582i Electro-Pneumatic Valve Positioners (PDF) - 499kb - 2/1/01 12:00 - Bulletins
3582 Series Pneumatic and Type 3582i Electro-Pneumatic Valve Positioners (Web) - 41kb - 2/1/01 12:00 - Bulletins

Back to top


3661



The Type 3661electro-pneumatic, single-acting positioner is used with various actuators on sliding-stem valves for throttling applications. This rugged positioner provides a valve position proportional to a standard milliampere dc input signal received from a control device.

 

 

 

Title - File Size (KB) - Publish Date - Document Type
Type 3660 and 3661 Positioners (PDF) - 91kb - 4/1/05 12:00Bulletins  
Type 3660 and 3661 Positioners (Web) - 43kb - 4/1/05 12:00 - Bulletins

Back to top

3620J



The Type 3620J electro-pneumatic, single-acting positioner is used with rotary actuators to accurately position control valves used in throttling applications. The positioner mounts integrally to the actuator housing. These rugged positioners provide a valve position proportional to a pneumatic input signal.

 

 

 

Title - File Size (KB) - Publish Date - Document Type
3610J and 3620J Series Positioners (Web) - 40kb - 10/1/04 12:00:00 AMBulletins  
3610J and 3620J Series Positioners (PDF) - 188kb - 10/1/04 12:00:00 AMBulletins  

Back to top


3620JP



The Type 3620JP electro-pneumatic, double-acting positioner is used with rotary actuators to accurately position control valves used in throttling applications. The positioner mounts integrally to the actuator housing. These rugged positioners provide a valve position proportional to a dc current input signal.

 

 

Title - File Size (KB) - Publish Date - Document Type
3610J and 3620J Series Positioners (Web) - 40kb - 10/1/04 12:00:00 AMBulletins  
3610J and 3620J Series Positioners (PDF) - 188kb - 10/1/04 12:00:00 AM - Bulletins

Back to top


3582



The Type 3582 pneumatic, single-acting positioner is used with diaphragm-actuated, sliding-stem control valve assemblies. The pneumatic valve positioner receives a pneumatic input signal from a control device and modulates the supply pressure to the control valve actuator, providing an accurate valve stem position that is proportional to the pneumatic input signal.

 

 

Title - File Size (KB) - Publish Date - Document Type
3582 Series Pneumatic and Type 3582i Electro-Pneumatic Valve Positioners (PDF) - 499kb - 2/1/01 12:00:00 AM - Bulletins
3582 Series Pneumatic and Type 3582i Electro-Pneumatic Valve Positioners (Web) - 41kb - 2/1/01 12:00:00 AM - Bulletins

Back to top


3660



The Type 3660 pneumatic, single-acting  positioner is used with various actuators on sliding-stem valves for throttling applications. This rugged positioner provides a valve position proportional to a pneumatic input signal received from a control device.

 



Title - File Size (KB) - Publish Date - Document Type
Type 3660 and 3661 Positioners (PDF) - 91kb - 4/1/05 12:00:00 AM - Bulletins
Type 3660 and 3661 Positioners (Web) - 43kb - 4/1/05 12:00:00 AM - Bulletins

Back to top



3610J



The Type 3610J pneumatic, single-acting positioner is used with rotary actuators to accurately position control valves used in throttling applications. The positioner mounts integrally to the actuator housing. These rugged positioners provide a valve position proportional to a pneumatic input signal.

 

 

Title - File Size (KB) - Publish Date - Document Type
3610J and 3620J Series Positioners (Web) - 40kb - 10/1/04 12:00 - Bulletins
3610J and 3620J Series Positioners (PDF) - 188kb - 10/1/04 12:0 - Bulletins

Back to top


3610JP



The Type 3610JP pneumatic, double-acting positioner is used with rotary actuators to accurately position control valves used in throttling applications. The positioner mounts integrally to the actuator housing. These rugged positioners provide a valve position proportional to a dc current input signal.

 

 

 

Title - File Size (KB) - Publish Date - Document Type
3610J and 3620J Series Positioners (Web) - 40kb - 10/1/04 12:00 - Bulletins
3610J and 3620J Series Positioners (PDF) - 188kb - 10/1/04 12:00 - Bulletins

Back to top

3710 / 3720

The Type 3710 pneumatic positioner and Type 3720 electro-pneumatic positioner are designed for use with either diaphragm or piston rotary actuators.These positioners provide a valve ball or disk position for a specific input signal. The Type 3710 positioner provides a valve position in response to a pneumatic input signal. The Type 3720 positioner is created by the addition of a Type 3722 electro-pneumatic converter to the Type 3710 positioner. The Type 3720 positioner provides a valve position in response to a dc current input signal. Either type can easily be configured as single- or double-acting for rotary actuators.

Title  - Document Type
Types 3710 and 3720 Pneumatic Positioners and Type 3722 - Converter Bulletins
Types 3710 and 3720 Pneumatic Positioners and Type 3722 - Converter Instruction_Manual

Back to top

 
Copyright © ICOM 2010. All rights reserved.
This page is created by ICOM, the home of CliftonPark.org.
Please report problems to webmaster.